PYJ-10 | 10mm O.D Tube to 10mm O.D Tube Plug-in Y | Pneumatic Fitting
10mm O.D tube to 10mm O.D tube plug-in Y pneumatic fitting connects two tube connections and a plug-in stem to push in another pneumatic fitting in same direction. Plug-in Y push in fitting is used to split fluiding directly from a push-in fitting. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Useful on pneumatic control valves or cylinders equipped with cartridges.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €2.830
10mm O.D Tube to 10mm O.D Tube Plug-in Y Pneumatic Fitting, Plug-in Y Push in Fitting, 10mm to 10mm One Touch Tube Fitting Plug-in Y, 10mm Tube Plug-in Y Push to Connect Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PYJ Plug-in Y