Misting Syetem Fittings | Spraying Fittings

The misting system fittings are made of brass with nickel plating and connect nylon tubing. The locking occurs under pressure, the greater the pressure the harder they lock. Pneuflex spraying fittings include a heavy duty body, thicker locking ferrule, and an over sized NBR o-ring. The unique design of these fittings allows them to be easily removed, replaced, or re-installed any time after the initial installation. No special tools or crimping procedures are required.

Pneuflex's push in fittings are designed for use with nylon tubing that accommodate metric tubing O.D ranging from 4mm to 12mm and accommodate inch tubing O.D ranging from 1/8" to 1/2". Thread sizes including 10-24UNC, 10-32UNF, M5X0.8, M6X1.

All Pneuflex misting system fittings are RoHS Compliant.

  • Available Shape of Release Sleeve: Round
  • Accommodate Metric Tubing O.D: 4mm, 6mm, 8mm, 10mm, 12mm
  • Accommodate Inch (Imperial) Tubing O.D: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2"
  • Available Thread Size: 10-24UNC, 10-32UNF, M5X0.8, M6X1

Construction | Specifications

constuction of misting fitting
Fluid Admitted: Air, Steam, Water(no freezing)
Body Material: Nickel Plated Brass
Thread Material: Nickle Plated Brass
Seal, O-ring: NBR
Working Pressure: 0—2.0MPa | 0—290psi
Working Temperature: -20°C—120°C | -4°F—248°F
Applicable Tube: PU / PA / PE / PVC

Documents

PDF Catalogue
Applicable Tube O.D
Thread Type and Size

Products of Misting Syetem Fittings



Parent Category: Pneumatic Products