PVG 1/2-1/4 | 1/2 Inch O.D Tube to 1/4 Inch O.D Tube Union Elbow Reducer | Push in Fitting
1/2 inch O.D tube to 1/4 inch O.D. tube union elbow reducer push in fitting is used to connect two tubings with different tubing diameter on both ends at a right angle. Pneumatic push to connect fitting union elbow reducer equipped with a convenient one touch release button that provides a easy and quick tubing connection and disconnection. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. The stainless collect design offers a secure connections that hold the tube firmly.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Union Elbow Reducer Push in Fitting 1/2 Tube to 1/4 Tube, Pneumatic Push to Connect Fitting Union Elbow Reducer, Tubing Fitting Union Elbow Reducer 1/2" Tubing - 1/4" Tubing, Union Elbow Reducer One Touch Tube Fitting 1/2" o.d.to 1/4" o.d. Tubing