PM-10 | 10mm O.D Tube to 10mm O.D Tube Bulkhead Union | Pneumatic Tube Fitting
10mm O.D to 10mm O.D bulkhead union pneumatic tube fitting is used to connect two tubes on both ends through a panel or other barrier in straight line. Bulkhead union push in tube fitting can easily change the tubing connector direction, provides optimum sealing between the fitting and the panel. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €2.228
10mm O.D to 10mm O.D Bulkhead Union Pneumatic Tube Fitting, 10mm Tube Bulkhead Union Push to Connect Fitting, Bulkhead Union Push in Tube Fitting, 10mm O.D Bulkhead Union One Touch Tube Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PM Bulkhead Union