PLM-3/8 | 3/8 Inch Tube to 3/8 Inch Tube Bulkhead Union Elbow | Push in Fitting
3/8 inch tube to 3/8 inch tube bulkhead union elbow push in fitting is made of nickel plated brass and plastic release sleeve, which is easy to install and release. The stainless collect design offers a secure connections that hold the tube firmly. To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
Push-in Tubing O.D: 3/8"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: Nickel Plated Brass & PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $2.221
Bulkhead Union Elbow Push in Fitting 3/8 Tube to 3/8 Tube, Pneumatic One Touch Tube Fitting, 3/8 Inch Tubing 3/8 Inch Tubing Bulkhead Elbow Union Pneumatic Push to Connect Fitting, Bulkhead Tube Connector 3/8" - 3/8"
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PLM Bulkhead Union Elbow