PLJ-12 | 12mm O.D Tube to 12mm O.D Tube Plug-in Elbow | Pneumatic Tube Fitting
12mm O.D to 12mm O.D plug-in elbow pneumatic tube fitting is used to connect tubing at a 90 degree angle to another push in fitting. Working pressure is 0-1MPa. Quick and simple tube connection and disconnection in tubing systems. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Useful on pneumatic control valves or cylinders equipped with cartridges.
Push-in Tubing O.D: 12mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €2.887
12mm O.D Plug-in Elbow Push to Connect Fitting, Plug-in Elbow One Touch Tube Fitting, Plug-in Elbow Push in Fitting 12mm Tube, 12mm O.D to 12mm O.D Plug-in Elbow Pneumatic Tube Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PLJ Plug-in Elbow