PGE 1/4-5/32 | 1/4 Inch O.D Tube to 5/32 Inch O.D Tube Union Tee Reducer | Pneumatic Fitting
1/4 inch O.D tube to 5/32 inch O.D. tube union tee reducer pneumatic fitting connects three tubes with size down in both 90 degree directions. The tube size in the middle is bigger than the two inline tubes. Pneumatic one touch fitting union tee reducer is used for connecting pneumatic plastic tubing in compressed air circuits, which can be fitted quickly and simply by pushing the tube directly. The pneumatic plastic tubing connection can be polyurethane (PU) tube, polyethylene (PE) tube, nylon (nylon) tube and teflon (PTFE) tubing. Working pressure is 0-1MPa.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/4 Tube to 5/32 Tube Union Tee Reducer Pneumatic Fitting, Pneumatic One Touch Fitting Union Tee Reducer, Union Tee Reducer Push to Connect Fitting 1/4" Tubing to 5/32" Tubing, Air Tube Fitting Union Tee Reducer 1/4 Hose to 5/32 Hose