PE-15 | 15mm O.D Tubing to 15mm O.D Tubing Union Tee | Pneumatic Air Connector
15mm to 15mm O.D tubing union tee pneumatic air connector is used to connect two tubes at 90 degree angles to a third tube with same tube diameter. Union tee push in fitting equipped with a convenient one touch release button that provides a easy and quick tubing connection and disconnection. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Working pressure of union tee push in fitting is 0-1MPa.
Push-in Tubing O.D1: 15mm
Push-in Tubing O.D2: 15mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €1.774
Union Tee Push in Fitting, 15mm Tubing One Touch Tube Fitting, 15mm to 15mm Push to Connect Fitting, 15mm to 15mm O.D Tubing Union Tee Pneumatic Air Connector, Union Tee Push in Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PE Union Tee
