PB 06-03 | 6mm O.D Tube, PT, R, BSPT 3/8 Thread Male Branch Tee | Push in Tube Fitting
6mm tube R 3/8 thread male branch tee push in tube fitting is commonly used for the connection of two plastic tubes at a 90 degress angle to a female threaded port. The stainless collect design offers a secure connections that hold the tube firmly. Working pressure of male branch tee tube fitting is 0-1MPa. External tightening with a flat wrench.
Push-in Tubing O.D: 6mm
Thread Size: PT, R, BSPT 3/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Thread Size: PT, R, BSPT 3/8
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Thread Material: Nickle Plated Brass
Thread Sealing: Teflon Coating
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: $1.156
6mm Tube 3/8 BSPT Thread Male Branch Tee Push to Connect Fitting, Male Branch Tee Pneumatic Tube Connector 6mm to PT 3/8 Thread, R 3/8 Thread 6mm Tube Male Branch Tee Pneumatic Fitting, 6mm Tube R 3/8 Thread Male Branch Tee Push in Tube Fitting
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PB Male Branch Tee