SPM 10L | 10mm Tube to 10mm Tube Bulkhead Union | 316L Stainless Steel Push in Fitting
316L stainless steel push in fitting - 10mm tube to 10mm tube bulkhead union is made of 316L stainless steel body, 316L stainless steel collet and FKM (Viton) seal, which is widely used to connect plastic tubings through a panel.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: €1.00
10mm Tube Bulkhead Union Straght 316L Inox Pneumatic Fitting, 10mm to 10mm 316L Stainless Steel Push to Connect Fitting Union Straight Bulkhead, 316L SS Bulkhead Union Tubing Fitting 10mm
Downloads
Parent Category: 316L Stainless Steel Push to Connect Fittings (PT, R, BSPT Thread)
SPM-L Bulkhead Union
