SPC-L Male Connector | 316L Stainless Steel Push to Connect Fittings

Male connector 316L stainless steel push to connect fitting is made of 316L stainless steel body, 316L stainless steel collet and FKM (Viton) seal, which is designed for use with polyurethane, polyethylene, nylon and teflon tubing to accommodate metric tubing O.D ranging from 4 mm to 16 mm and inch (imperial) tubing O.D from 1/8" to 1/2". Thread sizes range from R (PT, BSPT) 1/8 to R (PT, BSPT) 1/2.

External tightening with a flat spanner or socket wrench.

Advantages of Pneuflex's 316L Stainless Steel Push to Connect Fitting Male Connector:

• 316L stainless steel for higher strength and greater corrosion resistance than 304 stainless steel and 316 stainless steel
• Suitable for food and beverage process, paper, petrochemical, pharmaceutical, chemical, medical equipments
• Handle pressures up to 290 psi (20 bar) and an operating temperature range of -20 to +150°C (-4 to +302°F)

Construction | Specifications

Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316L Stainless Steel
Thread Material: 316L Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing (PTFE) ...