Series SPM bulkhead union is widely used to connect two tubings through a panel. The stainless steel bulkhead union is available in both metric and inch sizes.
The rugged construction of the stainless steel one touch tube fittings allow for use in high temperature applications and the stainless push in fittings perform well in harsh duty or washdown applications.
|Fluid Admitted||Air, Vacuum, Steem, Water etc.|
|Working Pressure||0∼2.0MPa | 0∼290psi|
|Proof Pressure||3.0Mpa | 435psi|
|Negative Pressure||-100Kpa | -29.5 In Hg|
|Working Temperature||-20～150°C | -4～302°F|
|Applicable Tube||PU / PA / PE / Teflon Tubing|
|Seal, O-ring||FKM (Viton)|
|Metric Tube ØD|
|Inch Tube ØD|
|Thread Standard and Type|
|R, PT, BSPT -- 55° Taper Pipe Thread||Metric Thread|
|R1/8||R1/4||R3/8||R1/2||R3/4||R1||M5 x 0.8||M6 x 1||M8 x 1||M10 x 1||M12 x 1.25||M14 x 1.5||M16 x 1.5||M20 x 1.5|
|UNF||NPT-60°American Standard Taper Pipe Thread||BSPP, G-55° Parallel Pipe Thread|
|10-32UNF||1/8 NPT||1/4 NPT||3/8 NPT||1/2 NPT||3/4 NPT||1 NPT||G1/8||G1/4||G3/8||G1/2||G3/4||G1|