Push in Fittings Union Y Reducer Accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8" to 1/2".
Union Y reducer pneumatic fittings are widely connect three tubes in different sizes. The tube size in the middle is smaller than the two inline tubes.
Union Y Reducer Pneumatic Fittings:
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
Pneuflex push in fittings union Y reducer can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
Metric Tube (mm)
|Part No. ||Push-in Tube ΦD1(mm) ||Push-in Tube ΦD2(mm) |
|PW06-04 ||6mm ||4mm |
|PW 08-04 ||8mm ||4mm |
|PW 08-06 ||8mm ||6mm |
|PW 10-04 ||10mm ||4mm |
|PW 10-06 ||10mm ||6mm |
|PW 10-08 ||10mm ||8mm |
|PW12-06 ||12mm ||6mm |
|PW 12-08 ||12mm ||8mm |
|PW 12-10 ||12mm ||10mm |