PWJ 12-10 | 12mm O.D Tube to 10mm O.D Tube Plug-in Y Reducer | Push to Connect Fitting
12mm to 10mm tube plug-in Y reducer push to connect fitting connects two tube connections and a plug-in stem to push in another pneumatic fitting in same direction. The tube size of two tube connection is smaller than the plug-in stem. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. The stainless collect design offers a secure connections that hold the tube firmly.
Push-in Tubing O.D1: 10mm
Push-in Tubing O.D2: 12mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: €2.486
12mm to 10mm Tube Plug-in Y Reducer Push to Connect Fitting, 12mm to 10mm Plug-in Y Reducer Tubing Fitting, One Touch Tube Fitting Plug-in Y Reducer, Plug-in Y Reducer Pneumatic Connector 12 to 10mm O.D
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread)
PWJ Plug-in Y Reducer