Push in Fittings Plug-in Y Reducer Accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8" to 1/2".
Plug-in Y reducer push in fittings are widely used to branch line in the same direction from pneumatic fittings. Tube size and stem size are different.
Plug-in Y Reducer Pneuamtic Fittings:
Thread: Nickle Plated Brass or Natural Brass
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Pneuflex push to in fittings plug-in Y reducer can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||PBT & Nickel Plated Brass |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
Metric Tube (mm)
|Part No. ||Push-in Tube ΦD1(mm) ||Push-in Tube ΦD2(mm) |
|PWJ 06-04 ||6mm ||4mm |
|PWJ 08-04 ||8mm ||4mm |
|PWJ 08-06 ||8mm ||6mm |
|PWJ 10-04 ||10mm ||4mm |
|PWJ 10-06 ||10mm ||6mm |
|PWJ 10-08 ||10mm ||8mm |
|PWJ 12-06 ||12mm ||6mm |
|PWJ 12-08 ||12mm ||8mm |
|PWJ 12-10 ||12mm ||10mm |