Pneumatic Fittings Male Delta Branch Accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8" to 1/2" and Thread Ranging from BSPT 1/8 to BSPT 1/2.
Male delta branch push in fittings are widely used to connect pneumatic female thread fittings and four tubes. External tightening with a flat wrench.
Male Delta Brangh Pneumatic Fittings:
Thread: Nickle Plated Brass or Natural Brass
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Thread Sealing: Teflon-coating
Pneuflex push in fittings male delta branch can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||PBT & Nickel Plated Brass |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|R, PT, BSPT -- 55° Taper Pipe Thread ||Metric Thread* |
|R1/8 ||R1/4 ||R3/8 ||R1/2 ||M5 x 0.8 ||M6 x 1 ||M8 x 1 ||M10 x 1 ||M12 x 1.25 ||M14 x 1.5 ||M16 x 1.5 ||M20 x 1.5 |
Metric Tube (mm)- PT, R, BSPT Thread
|Part No. ||Push-in Tube ΦD(mm) ||Thread (PT, R, BSPT) |
|PHX 06-01 ||6mm ||R1/8 |
|PHX 06-02 ||6mm ||R1/4 |
|PHX 06-03 ||6mm ||R3/8 |
|PHX 06-04 ||6mm ||R1/2 |
|PHX 08-01 ||8mm ||R1/8 |
|PHX 08-02 ||8mm ||R1/4 |
|PHX 08-03 ||8mm ||R3/8 |
|PHX 08-04 ||8mm ||R1/2 |
*M8, M10, M12, M14, M16 and M20 thread are also available. Pls contact with our Sales.