Plastic Pneumatic Fittings Male Branch Tee Accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8" to 1/2" and Thread Ranging from M5, M6, BSPT 1/8 to BSPT 1/2.
Push in fittings (plastic pneumatic fittings) male branch tee is widely used to connect two tubes to a female thread in both 90° directions. External tightening with a flat wrench.
Plastic Pneumatic Fittings Male Branch Tee:
Shape of Release Sleeve: Oval and Round.
Thread Sealing: Teflon-coating
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Pneuflex push in fittings male branch tee can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||PBT & Nickel Plated Brass |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|R, PT, BSPT -- 55° Taper Pipe Thread ||Metric Thread* |
|R1/8 ||R1/4 ||R3/8 ||R1/2 ||M5 x 0.8 ||M6 x 1 ||M8 x 1 ||M10 x 1 ||M12 x 1.25 ||M14 x 1.5 ||M16 x 1.5 ||M20 x 1.5 |
Metric Tube (mm)- PT, R, BSPT Thread
*M8, M10, M12, M14, M16 and M20 thread are also available. Pls contact with our Sales.