In the misting industry the fittings are made of brass with nickel plating and connect nylon tubing. The locking occurs under pressure, the greater the pressure the harder they lock.
Pneuflex misting fittings (misting system fittings, push in Fittings) include a heavy duty body, thicker locking ferrule, and an over sized NBR o-ring. The unique design of these fittings allows them to be easily removed, replaced, or re-installed any time after the initial installation. No special tools or crimping procedures are required.
| || || Fluid Admitted ||Air, Water, Steam |
| || Working Pressure ||0∼10MPa | 0∼2900psi |
| || Working Temperature ||-20～80°C | -4～176°F |
| || Applicable Tube ||PU / PA / FEP / PFA |
| || Body ||Nickel Plated Brass |
| || Seal, O-ring ||NBR |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|UNC ||Metric Thread ||UNF |
|10-24UNC ||M5X0.8 ||M6X1 ||10-32UNF |
Coupling Union with Nozzle Port
Union Straight with Nozzle Port