PNEUFLEX Grey Push to Connect Fittings Male Triple Branch Reducer Accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tubing O.D Ranging from 1/8" to 1/2". Accommodate Thread Ranging from BSPP 1/8 to BSPP 1/2.
Male triple branch reducer gery push to connect fittings (pneumatic fittings, tube fittings) are widely used in pneumatic circuit. Male triple branch reducer is used to four-branch lines at right angles from female thread, connection of two diffenrent ΦD tubes. External tightening with a flat wrench.
Male triple branch reducer gery push to connect fittings:
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Grey.
Body Color: Grey.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||Nickel Plated Brass & PBT |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|BSPP, G -- 55° Taper Pipe Thread |
|G1/8 ||G1/4 ||G3/8 ||G1/2 |
Metric Tube (mm)- BSPP, G Thread
|Part No. ||Push-in Tube ΦD1(mm) ||Push-in Tube ΦD2(mm) ||Thread (BSPP, G) |
|WPKD 06-04-G01 ||6mm ||4mm ||G1/8 |
|WPKD 06-04-G02 ||6mm ||4mm ||G1/4 |
|WPKD 08-06-G01 ||8mm ||6mm ||G1/8 |
|WPKD 08-06-G02 ||8mm ||6mm ||G1/4 |
|WPKD 08-06-G03 ||8mm ||6mm ||G3/8 |
|WPKD 10-08-G01 ||10mm ||8mm ||G1/8 |
|WPKD 10-08-G02 ||10mm ||8mm ||G1/4 |
|WPKD 10-08-G03 ||10mm ||8mm ||G3/8 |
|WPKD 12-10-G02 ||12mm ||10mm ||G1/4 |
|WPKD 12-10-G03 ||12mm ||10mm ||G3/8 |
|WPKD 12-10-G04 ||12mm ||10mm ||G1/2 |