Composite Push in Fittings Plug-in Elbow Accommodates Metric Tubing O.D Ranging from 4mm to 16mm, Inch Tube O.D Ranging from 1/8" to 1/2".
Plug-in elbow pneumatic push in fittings (one touch fittings) are widely used to connects tubing at a 90° angle to a push-in fitting or cartridge.
Push to Connect Fittings Plug-in Elbow:
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Pneuflex composite push in fittings plug-in elbow can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||PBT & Nickel Plated Brass |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
Metric Tube (mm)
|Part No. ||Push-in Tube ΦD(mm) |
|PLJ 04 ||4mm |
|PLJ 05 ||5mm |
|PLJ 06 ||6mm |
|PLJ 08 ||8mm |
|PLJ 09 ||9mm |
|PLJ 10 ||10mm |
|PLJ 12 ||12mm |
|PLJ 14 ||14mm |
|PLJ 15 ||15mm |
|PLJ 16 ||16mm |