Pneumatic fittings - male triple banjo is used to connect a tubing at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench. Accommodate metric tubing O.D ranging from 4mm to 12mm, inch tubing O.D ranging from 1/8" to 1/2". External tightening with a flat wrench.
Male Triple Banjo (One Touch Tube Fittings):
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
All Pneuflex's pneumatic fittings, push to connect fittings (NPT Thread), one touch tube fittings with O-ring can be used with PVC Tubing, Polyethylene Tubing, Nylon Tubing and Polyurethane Tubing.
| || || Fluid Admitted ||Air, Vacuum, Water(no freezing) |
| || Working Pressure ||0—1.0MPa | 0—150psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||0—60°C | 32～140°F |
| || Applicable Tube ||PU / PA / PE / PVC |
| || Body ||Nickel Plated Brass |
| || Seal, O-ring ||NBR |
| || Lock Claw ||Stainless Steel(SUS) |
| || || |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|BSPP, G -- 55° Taper Pipe Thread |
|G1/8 ||G1/4 ||G3/8 ||G1/2 |
Metric Tube (mm)- BSPP, G Thread
|Part No. ||Push-in Tube ΦD(mm) ||Thread (BSPP, G) |
|PHT 04-G01 ||4mm ||G1/8 |
|PHT 04-G02 ||4mm ||G1/4 |
|PHT 06-G01 ||6mm ||G1/8 |
|PHT 06-G02 ||6mm ||G1/4 |
|PHT 06-G03 ||6mm ||G3/8 |
|PHT 06-G04 ||6mm ||G1/2 |
|PHT 08-G01 ||8mm ||G1/8 |
|PHT 08-G02 ||8mm ||G1/4 |
|PHT 08-G03 ||8mm ||G3/8 |
|PHT 08-G04 ||8mm ||G1/2 |
|PHT 10-G01 ||10mm ||G1/8 |
|PHT 10-G02 ||10mm ||G1/4 |
|PHT 10-G03 ||10mm ||G3/8 |
|PHT 10-G04 ||10mm ||G1/2 |
|PHT 12-G02 ||12mm ||G1/4 |
|PHT 12-G03 ||12mm ||G3/8 |
|PHT 12-G04 ||12mm ||G1/2 |