Pneuflex nickel plated brass push in tubing fittings (brass pneumatic fittings, brass one touch fittings) are recommended for compressed air, pneumatic, instrumentation, circuit, lubricant and cooling lines. To assemble, simply push the tube into fitting until it bottoms out.
Brass one touch fittings come in a variety of types, models and sizes to satisfy various piping demands, the thread can be NPT thread, PT, R, BSPT thread and BSPP, G thread.
There are two kinds of body can be selected: nickel-plated brass or natural brass. Nickel-palted metal body ensures anti-corrosion and anti-contamination.
Brass Push in Tubing Fittings
| || || Fluid Admitted ||Air, Water, Steam |
| || Working Pressure ||0∼2.0MPa | 0∼290psi |
| || Proof Pressure ||3.0Mpa | 435psi |
| || Negative Pressure ||-100Kpa | -29.5 In Hg |
| || Working Temperature ||-20～150°C | -4～302°F |
| || Applicable Tube ||PU/PA/PE/PVC/FEP/PFA |
| || Body ||Nickel Plated Brass / Brass |
| || Seal, O-ring ||FKM (Viton) / NBR |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
|R, PT, BSPT -- 55° Taper Pipe Thread ||Metric Thread |
|R1/8 ||R1/4 ||R3/8 ||R1/2 ||M5 x 0.8 ||M6 x 1 ||M8 x 1 ||M10 x 1 ||M12 x 1.25 ||M14 x 1.5 ||M16 x 1.5 ||M20 x 1.5 |
|UNF ||NPT-60°American Standard Taper Pipe Thread ||BSPP, G-55° Parallel Pipe Thread |
|10-32UNF ||1/8 NPT ||1/4 NPT ||3/8 NPT ||1/2 NPT ||G1/8 ||G1/4 ||G3/8 ||G1/2 |
Union Straight Reducer