Stainless steel push in fittings (stainless steel push to connect fittings) from Pneuflex are made of SUS316 material with FKM seals. Pneuflex's stainless steel push in fittings come in a variety of types, models and sizes to satisfy various piping demands and provide essential links between components in fluid systems.
Stainless steel push in fittings (stainless steel push to connect fittings) are suitable for use in corrosive environments to carry aggressive fluids and for any application in the chemical industry.
Pneuflex's stainless steel push in fittings are designed for use with teflon tubing, nylon tubing, polyurethane and polyethylene tubing that accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D ranging from 1/8" to 1/2". Thread sizes range is from M3, M5, 10-24UNC, 10-32UNF to 1/2".
♦ Resistant to aggressive environments.
♦ Suitable for food and beverage applications.
♦ Elbows and Tees are made from forged 316 SS. The thread of elbows and tees can be 360° swiveled.
♦ FKM (Viton) o-ring sealing in all stainless steel push in fittings.
♦ Can be used with steam.
♦ BSPT, NPT, Metric thread are both available.
316 Stainless Steel Push in Fittings, 316 Stainless Steel Push to Connect Fittings
|| Fluid Admitted
||Air, Vacuum, Steem, Water etc.
|| Working Pressure
||0∼2.0MPa | 0∼290psi
|| Proof Pressure
||3.0Mpa | 435psi
|| Negative Pressure
||-100Kpa | -29.5 In Hg
|| Working Temperature
||-20～150°C | -4～302°F
|| Applicable Tube
||PU / PA / PE / Teflon Tubing
|| Seal, O-ring
|R, PT, BSPT -- 55° Taper Pipe Thread
||M5 x 0.8
||M6 x 1
||M8 x 1
||M10 x 1
||M12 x 1.25
||M14 x 1.5
||M16 x 1.5
||M20 x 1.5
||NPT -- 60° American Standard Taper Pipe Thread
Union Straight Reducer
Female Bulkhead Straight
Bulkhead Union Straight
Swiveled Male Elbow with Plastic Sleeve
Swiveled Male Branch Tee with Plastic Sleeve
Custom Stainless Steel Push in Fittings and Stainless Steel Push to Connect Fittings
Pneuflex provides innovative stainless steel push in fittings to customers worldwide and offers the best engineering assistance to help in every stage of your design. Our experienced engineers welcome the opportunity to assist in the design and manufacture of custom stainless steel push in fittings.