PG 1/2-3/8 | 1/2 Inch O.D Tube to 3/8 Inch O.D Tube Union Straight Reducer | Push in Fitting
1/2 inch O.D tube to 3/8 inch O.D. tube union straight reducer push in fitting is used to connect two tubings with different tubing diameter on both ends for an inline air connection, which is used for connecting pneumatic plastic tubing in compressed air circuits. Union straight reducer push to connect fitting can be fitted quickly and simply by pushing the tube directly. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out. Oval shape release sleeve and round shape release sleeve can be selection.
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
1/2 to 3/8 Inch Tube Union Straight Reducer Push in Fitting, Union Straight Reducer Push to Connect Fitting, One Touch Tube Fitting Union Straight Reducer 1/2" Tubing to 3/8" Tubing, Union Straight Reducer Tube Connector 1/2 Hose to 3/8 Hose